Optical Fibre and Copper Cabling Systems

SC-APC ATTENUATORS

116X02X attenuator - Warren and Brown

SC-APC ATTENUATORS

SC-APC attenuators : Attenuators : Warren & Brown Technologies – Details

Typically installed close to the Transmitting system (Tx), not the receive (Rx) system. Attenuators made from doped fibre are used in-line, in an optical transmission system, to reduce the signal strength, to safe and acceptable levels. This signal attenuation prevents unplanned outages due to equipment failure. These items are used in systems such as: Telecommunication Networks; CATV Networks; Data Communications Networks; Instrumentation and Local Area Networks. The Attenuator is manufactured to recognised and approved industry standards, and will achieve a 20 year service lifetime, under typical operational conditions. Each attenuator assembly is capable of a reasonable number (eg 500) of matings/unmatings, and of withstanding normal (not excessive) operational handling forces/loads without suffering any damage or significant increase in optical performance. The complete assembly is capable of reliable operation in Exchanges or Repeaters over the temperature range of –40 degrees to + 80 degrees Celsius, and up to high levels of RH. The attenuator can be safely stored, in suitable accommodation, over the temperature range of –50 degrees to + 85 degrees Celsius.

Part NoConnector TypedB (Note 1)Description
116x02x01A/SC1 dB ± 0.3Attenuator, In-Line, > + 20 dBm
116x02x02A/SC2 dB ± 0.4Attenuator, In-Line, > + 20 dBm
116x02x03A/SC3 dB ± 0.5Attenuator, In-Line, > + 20 dBm
116x02x05A/SC5 dB ± 0.8Attenuator, In-Line, > + 20 dBm
116x02x08A/SC8 dB ± 1.0Attenuator, In-Line, > + 20 dBm
116x02x10A/SC10 dB ± 1.2Attenuator, In-Line, > + 20 dBm
116x02x15A/SC15 dB ± 1.7Attenuator, In-Line, > + 20 dBm
116x02x20A/SC20 dB ± 2.2Attenuator, In-Line, > + 20 dBm
Note 1: Attenuation accuracy between: 1260 to 1360nm and 1480 to 1580nm wavelengths

In stock

Add to Network Kit

SC-APC attenuators : Attenuators : Warren & Brown Technologies - Details

Typically installed close to the Transmitting system (Tx), not the receive (Rx) system. Attenuators made from doped fibre are used in-line, in an optical transmission system, to reduce the signal strength, to safe and acceptable levels. This signal attenuation prevents unplanned outages due to equipment failure. These items are used in systems such as: Telecommunication Networks; CATV Networks; Data Communications Networks; Instrumentation and Local Area Networks. The Attenuator is manufactured to recognised and approved industry standards, and will achieve a 20 year service lifetime, under typical operational conditions. Each attenuator assembly is capable of a reasonable number (eg 500) of matings/unmatings, and of withstanding normal (not excessive) operational handling forces/loads without suffering any damage or significant increase in optical performance. The complete assembly is capable of reliable operation in Exchanges or Repeaters over the temperature range of –40 degrees to + 80 degrees Celsius, and up to high levels of RH. The attenuator can be safely stored, in suitable accommodation, over the temperature range of –50 degrees to + 85 degrees Celsius.

Part NoConnector TypedB (Note 1)Description
116x02x01A/SC1 dB ± 0.3Attenuator, In-Line, > + 20 dBm
116x02x02A/SC2 dB ± 0.4Attenuator, In-Line, > + 20 dBm
116x02x03A/SC3 dB ± 0.5Attenuator, In-Line, > + 20 dBm
116x02x05A/SC5 dB ± 0.8Attenuator, In-Line, > + 20 dBm
116x02x08A/SC8 dB ± 1.0Attenuator, In-Line, > + 20 dBm
116x02x10A/SC10 dB ± 1.2Attenuator, In-Line, > + 20 dBm
116x02x15A/SC15 dB ± 1.7Attenuator, In-Line, > + 20 dBm
116x02x20A/SC20 dB ± 2.2Attenuator, In-Line, > + 20 dBm
Note 1: Attenuation accuracy between: 1260 to 1360nm and 1480 to 1580nm wavelengths
  • Fixed attenuation values
  • Accurate attenuation values between1260 to 1360nm and 1480 to 1580nm wavelengths
  • Return loss: UPC >50 dB; APC >55-60dB
  • Optical performance 100% factory tested
  • Climatic range: – 40 oC to + 80oC, and 5% to 95% humidity, non condensing
  • Various connectors and finishes available APC, etc
  • Compact design fits in existing connections or patch panels
  • Convenience and ease of handling
  • Protective caps provided
  • Rating > + 20 dBm

PDL (Polarisation Dependant Loss) 

 Loss Value 1310nm Wavelength1550nm Wavelength 
5dB0.05dB0.01dB
10dB0.1dB0.05dB
15dB0.2dB0.1dB
20dB0.3dB0.2dB

PMD (Polarisation Mode Dispersion) 

For attenuators in the range 1 to 25 dB – Value is < 0.2 ps

Reviews

There are no reviews yet.

Be the first to review “SC-APC ATTENUATORS”

Looking for a tailored solution? Call us today.