Optical Fibre and Copper Cabling Systems

OPTICAL FIBRE SPLICE AND PATCH PANELS, 3RU, SWING OUT

60103221044081L - Warren and Brown

OPTICAL FIBRE SPLICE AND PATCH PANELS, 3RU, SWING OUT

These 3RU, LH/RH pivot open Splice & Patch or Patch only sub-racks (patch panels) accommodate various numbers of optical fibres (up to 144 LC fibres). They feature optical fibre cord management that maintains the MBR at 30 mm radius throughout. These sub-racks (patch panels) mount in a 19 inch or 21″ rack with either mid or rear brackets. Loose tubes housed in protection tubes are fed around the rear of the body, through hook and loop ties under a guiding / protection plate, to pass aroud the guiding cylinder to the splice trays. The protection / loose tubes are secured in two places to the entry cylinder to generate a large, smooth, entry curve to the splice trays. Along the front face of the swing out sub-rack, tie-off slots are provided for optical fibre cords. At the front of the swing out sub-rack is a label showing the layout. The swing out sub-rack has a non-continuous front edge, that allows for connector testing using probe type instruments. Can be installed into any ODF or Equipment Rack.

In stock

Add to Network Kit

These 3RU, LH/RH pivot open Splice & Patch or Patch only sub-racks (patch panels) accommodate various numbers of optical fibres (up to 144 LC fibres). They feature optical fibre cord management that maintains the MBR at 30 mm radius throughout. These sub-racks (patch panels) mount in a 19 inch or 21" rack with either mid or rear brackets. Loose tubes housed in protection tubes are fed around the rear of the body, through hook and loop ties under a guiding / protection plate, to pass aroud the guiding cylinder to the splice trays. The protection / loose tubes are secured in two places to the entry cylinder to generate a large, smooth, entry curve to the splice trays. Along the front face of the swing out sub-rack, tie-off slots are provided for optical fibre cords. At the front of the swing out sub-rack is a label showing the layout. The swing out sub-rack has a non-continuous front edge, that allows for connector testing using probe type instruments. Can be installed into any ODF or Equipment Rack.

  • Maintains fibre bending radii throughout, for terminated optical fibres at minimum 30mm
  • Supplied with set of splice cassettes
  • Two splice protector clips provided on each splice tray
  • Sturdy swing out tray design incorporates built in splice tray holder
  • Swing out design allows easy access to splice and patch areas
  • Fully symmetrical design allows cable entry / exit of cables from either left or right side
  • Suits 19″ & 21″ rack mounting in front / mid / rear / front offset configurations
  • Available to suit any connector type (simplex & duplex)
  • Supplied with adaptors & pigtails (some variations excluded)
  • Design ensures minimal fibre movement and disruption when tray is opened
  • Loose tube, Tight Buffer or Ribbon fibre options available
  • Hook and loop style fasteners supplied
  • Supplied with mounting brackets and mounting hardware
  • A Grade SC/A, SC, LC adaptors available as an option
  • Large selection of patch panels, splice holders, thru adaptors available to customise to requirements

 

Options & Variations

  • Splice & Patch versions
  • Splice only versions also available
  • Patch only versions also availlable

Fibre options

  • Singlemode – OS1 / OS2
  • Multimode – OM1, OM2, OM3, OM4

Connector type

  • SC, SC Duplex
  • SC/A, SC/A Duplex
  • LC, LC Duplex, LC Quad
  • Other adaptor types available

Fibre capacity (3RU) 

  • 96 Fibre SC, SC/A, LC
  • 114 LC Simplex, LC Duplex, LC Quad

 1RU, 2RU also available

Pigtails

  • Included in product
  • Multimode or Singlemode

Mounting Options

  • 19″ Front
  • 19″ Front offset
  • 19″ Mid
  • 19″ Rear
  • 21” Front
  • 21″ Front offset (Left or Right)
  • 21″ Mid
  • 21″ Rear

Swing out options

  • Left or Right swing direction

Cables entry / exit options

  • From Left or Right

Reviews

There are no reviews yet.

Be the first to review “OPTICAL FIBRE SPLICE AND PATCH PANELS, 3RU, SWING OUT”

Looking for a tailored solution? Call us today.