Optical Fibre and Copper Cabling Systems

OPTICAL FIBRE SINGLEMODE PATCH CORDS

Warren and Brown Singlemode Patch Cord - 63505019

OPTICAL FIBRE SINGLEMODE PATCH CORDS

Optical Fibre singlemode patch cords from WBT meets ITU – G657D (optional G657A1 and G567A2) specification, with no water peak and low sensitivity to bends. The single optical fibre cord has the following features: coloured yellow; 9um core dia; 125µm cladding dia; and a 900µm tight buffered core. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100 Newtons; an MBR of 30mm; ability to withstand a small crushing load; and ability to withstand a small impact load. The cord also passes a standard edge bend test.

Every connector assembly supplied by WBT is made using quality parts, in a high quality termination facility, to recognised and approved Australian and International Standards. The quality and inspection procedures employed ensure only high quality, individually inspected and approved pigtails and patchcords are supplied. Therefore Customers can have confidence that the product supplied will perform reliably to a high standard in the Telco network for many years.

 

patch cords button

In stock

Add to Network Kit

Optical Fibre singlemode patch cords from WBT meets ITU - G657D (optional G657A1 and G567A2) specification, with no water peak and low sensitivity to bends. The single optical fibre cord has the following features: coloured yellow; 9um core dia; 125µm cladding dia; and a 900µm tight buffered core. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100 Newtons; an MBR of 30mm; ability to withstand a small crushing load; and ability to withstand a small impact load. The cord also passes a standard edge bend test.

Every connector assembly supplied by WBT is made using quality parts, in a high quality termination facility, to recognised and approved Australian and International Standards. The quality and inspection procedures employed ensure only high quality, individually inspected and approved pigtails and patchcords are supplied. Therefore Customers can have confidence that the product supplied will perform reliably to a high standard in the Telco network for many years.

 

patch cords button

Optical Fibre singlemode patch cords from Warren & Brown Technologies (WBT) provide guaranteed reliability and performance. Available with either G652D (standard) or G657.A.2 fibre cable, these patch cords are factory tested and terminated to the highest standards. Common variations including SC, SC/A or LC Duplex patch cords are available off the shelf, while other options have very short lead times, <3 days. These multimode optical fibre patch cords are used in Telecom Exchanges, Data centres and IT rooms.

Optical Fibre singlemode patch cords provide a connection path between patching fields in optical fibre switches, routers and optical fibre patch panels. A singlemode optical fibre patch cord transmits large volumes of critical data and is an important component in any optical fibre network.

It is important that network operators do not overlook the quality of an optical fibre patch cord, as the cabling infrastructure including patch cords, are often the most common point of failure.  Insist on quality, insist on Warren & Brown Technologies.

Example of available options –

OS1 fibre patch cord – any connector type, any length

OS2 fibre patch cord – any connector type, any length

Bend insensitive fibre patch cord (G657.A.2) – any connector type, any length

 

  • Composite body with zirconia ceramic ferrule
  • Complies with: JIS C-5973 ANSI X3T11 Fibre Channel  TIA 568
  • Insertion Loss: 0.2 dB Typical 0.3 dB maximum
  • Warren & Brown are a Telstra approved supplier
  • Available in any connector type ( FC,SC, SC/A, LC etc)
  • Available in any length
  • Any range of fibers (1F,2F,4F,6F, 8F,12F,16F,24,48F etc)
  • Fast production time
  • Production facilities in Australia & Asia
  • Singlemode OS1, OS2 fibre. 2mm outer diameter
  • Standard patch cords are G652D fibre. Options of G657A1 and G657A2 fibre cable are also available

The reduced bend radius of G657A2 fibre cable makes this cable the ideal choice for patch cords used in FTTx networks, telecom carrier networks and data centres. In comparison to G.652D fibre which has a 30mm Minimum Bend Radius (MBR), G.657A2 fibre has a MBR of only 15mm using 2mm OD cable, making it extremely flexible and resistant to inadvertent over bending. G.657A2 fibre is fully backwards compatible with ITU T-G.652D fibre characteristics.

WBT provide a full range of fibre optic patch cords consisting of any fibre cable and connector type.

Warren and Brown Singlemode Patch Cords information

Warren and Brown Singlemode Patch Cords information

Warren and Brown Singlemode Patch Cords Specifications

Reviews

There are no reviews yet.

Be the first to review “OPTICAL FIBRE SINGLEMODE PATCH CORDS”

Looking for a tailored solution? Call us today.