Optical Fibre and Copper Cabling Systems

ELBOW, 90 DEGREES, M50 X 1.5

TC1279-434-(2)

ELBOW, 90 DEGREES, M50 X 1.5

Part Number: TC1279-434 

This 90o Elbow is typically used to feed an optical fibre cable into a cabinet, after the cable has “broken-out” into several optical fibres. The Elbow is fastened to the cabinet using an M50 nut, after passing through a clearance hole. The lower end of the Elbow can accept either a 38mm dia cable ; or a Convoluted Tube, which houses the incoming optical fibre cable. The inner radius of the Elbow is 56mm, and the internal diameter is 41.5mm; so the Elbow can typically accept a cable of around 37/38mm dia

In stock

Part Number: TC1279-434 

This 90o Elbow is typically used to feed an optical fibre cable into a cabinet, after the cable has “broken-out” into several optical fibres. The Elbow is fastened to the cabinet using an M50 nut, after passing through a clearance hole. The lower end of the Elbow can accept either a 38mm dia cable ; or a Convoluted Tube, which houses the incoming optical fibre cable. The inner radius of the Elbow is 56mm, and the internal diameter is 41.5mm; so the Elbow can typically accept a cable of around 37/38mm dia

  • 90 degrees Elbow feeds cable into a cabinet
  • Makes a dust tight seal
  • Lower Elbow end accepts 38mm dia Convoluted Tube

Reviews

There are no reviews yet.

Be the first to review “ELBOW, 90 DEGREES, M50 X 1.5”

Looking for a tailored solution? Call us today.