Optical Fibre and Copper Cabling Systems

Wireless Infrastructure

WBT’s innovative approach to wireless infrastructure cabling and connectivity has proven to reduce CAPEX and OPEX for network builders. By simplifying cable construction and utilising streamlined connection devices and interface boxes, WBT has a total solution that allows for easy and cost effective installation. Most modern wireless networks utilise a distributed base station architecture which physically separates the Remote Radio Unit (RRU) and Base Band Unit (BBU). The RRU which is now generally positioned at the top of the tower, just below the antenna, generally feature power and digital (optical) interfaces. Optical fibre cable has become the preferred choice for connecting RRU and BBU equipment as it provides high bandwidth, low latency and reliable transmission.

Showing all Wireless Infrastructure

HYBRID TAIL CABLE – 2 FIBRE PAIRS, 2 POWER PAIRS (P/N TC4039-132-XX)

  • Suitable for high power requirement RRU’s
  • Customisable lengths
  • 2 pair power connectors at junction box end

2015 Mobiles Catalogue WBT PAGE 18 2 Mobiles Catalogue WBT PAGE 16 Mobiles Catalogue WBT PAGE 16 -V2 Mobile networks - Warren and Brown

7/8″ HYBRID CABLE JUNCTION BOX AND TAIL CABLE (TC4039-15 Series)

Junction Box

This junction box is used as an enclosure for both optical fibre cords and 48V DC power cables as well as serving as a connection interface between the hybrid trunk cable and hybrid tail cables. The internal connections feature a pivot opening MPO cassette, a 16 position SC/A connector patch panel and 4 x positions for 48 volt DC power connectors. It is specifically designed for connecting up to 4RRU’s and provides a quick and effective means of adding extra wireless sectors. It is supplied with pre-terminated trunk cable for rapid deployment. Mobile networks - Warren and Brown

  • Suitable for connecting up to 4 RRU’s
  • Compatible with 7/8” hybrid trunk cable
  • High Density, scalable solution
  • Connects to RRU’s via 1/2” hybrid jumper cable
  • Supplied with pre-configured trunk cable

 

Trunk Cable

The 7/8” multi feed trunk cable is provided with every TC4039MOBILE02 junction box as part of a pre-terminated solution to allow for fast and easy installation. Custom trunk cable lengths can be specified with every junction box.

  • Provided pre-terminated and connected to every TC4039MOBILE02 Junction box
  • Custom trunk cable lengths to suit every site
End 1 – RRU tower sideTC4039-15-XX End to End.309 Mobile networks - Warren and Brown

2 – MPO connectors and
2 – 4 DC power pairs with connectors
supplied preconfigured in junction box

End 2 – BBU side TC4039-15-XX End to End.311 Mobile networks - Warren and Brown

2 – MPO connectors
4 – DC power pairs (no connectors)
Fibre cable is connected into MPO fibre optic trays within a fibre termination rack and DC power cables are connected to the power distribution board

JUNCTION BOX, FOR SINGLE RRU APPLICATION (P/N TC4029CWDM3)

An IP66 weatherproof enclosure, typically installed on a pole at a Remote Radio Unit site. The enclosure also allows the RRU radio equipment to be connected to the optic fibre cable using a composite cable, and the 2 x A/SC position patch panel provided. A twin power connector position is provided, to enable connection between two power cables.

 

  • Hybrid 1/2” cable – System 1 (for single pair fibre hybrid tail cable only)
  • Compatible with most pre-installed 1/2” hybrid trunk cable
  • Connects to RRU via 1/2” hybrid tail cable

1/2” HYBRID CABLE JUNCTION BOX AND TAIL CABLE (TC4039-95 Series)

Junction Box

This hybrid cable junction box is used as an enclosure for both optical fibre cords and 48V DC power cables as well as serving as a connection interface between the 1/2” hybrid trunk cable and hybrid tail cables. The internal connections feature a 4 x SC/A connector patch panel and 48 volt DC power connector pair. It is supplied with pre-terminated trunk cable for rapid deployment.

  • Compatible with 1/2”  hybrid trunk cableTC4029MOBILE01 Mobile networks - Warren and Brown
  • Connects to RRU’s via 1/2” hybrid jumper cable
  • Supplied with pre-configured 1/2” trunk cable

 

 

Trunk Cable

The 1/2”  trunk cable is provided with every TC4029MOBILE01 junction box as part of a pre-terminated solution to allow for fast and easy installation. Custom trunk cable lengths can be specified for every junction box, ensuring precise cable lengths and no material wastage.

  • Provided pre-terminated and connected to every TC4029MOBILE01 Junction box
  • Custom trunk cable lengths to suit every site

 

End 1 RRU tower side TC4039-95-XX SC End sideview Mobile networks - Warren and Brown

4 – SC/A connectors
1 – DC power pairs with connectors supplied preconfigured in junction box

End 2 – BBU side TC4039-95-XX LC End side view - Mobile networks - Warren and Brown

4 – LC connectors
1- DC power pairs (no connectors)

Fibre cable is connected into fibre optic trays within a fibre termination rack and DC power cables are connected to the power distribution board

OPTICAL FIBRE PIGTAILS, GRADE A CONNECTORS

This SMOF, pigtail with Grade A* connector, 1.5 metres in length, is supplied with 0.9 mm dia.Jacketed optical fibre. The SMOF meets G652D specification, with no water peak in the wavelength profilegraph and Telstra Specification 1557 Part 2 Issue 6. The single optical fibre has the following features: 9umcore dia. 125um cladding dia. and a 900um tight buffered jacket.

The complete assembly is capable of reliable operation in Exchanges or Repeaters over the temperature range of -20 degrees to +70 degrees Celsius and up to high levels of RH.

 

patch cords button

OPTICAL FIBRE SINGLEMODE PATCH CORDS

Optical Fibre singlemode patch cords from WBT meets ITU – G657D (optional G657A1 and G567A2) specification, with no water peak and low sensitivity to bends. The single optical fibre cord has the following features: coloured yellow; 9um core dia; 125µm cladding dia; and a 900µm tight buffered core. The core has an aramid yarn (eg Kevlar) strength member, provided under a LSZH sheath. The cord has physical properties of: minimum tensile strength of 100 Newtons; an MBR of 30mm; ability to withstand a small crushing load; and ability to withstand a small impact load. The cord also passes a standard edge bend test.

Every connector assembly supplied by WBT is made using quality parts, in a high quality termination facility, to recognised and approved Australian and International Standards. The quality and inspection procedures employed ensure only high quality, individually inspected and approved pigtails and patchcords are supplied. Therefore Customers can have confidence that the product supplied will perform reliably to a high standard in the Telco network for many years.

 

patch cords button

Looking for a tailored solution? Call us today.