Optical Fibre and Copper Cabling Systems

Wireless Infrastructure

WBT's innovative approach to wireless infrastructure cabling and connectivity has proven to reduce CAPEX and OPEX for network builders. By simplifying cable construction and utilising streamlined connection devices and interface boxes, WBT has a total solution that allows for easy and cost effective installation.Most modern wireless networks utilise a distributed base station architecture which physically separates the Remote Radio Unit (RRU) and Base Band Unit (BBU). The RRU which is now generally positioned at the top of the tower, just below the antenna, generally feature power and digital (optical) interfaces. Optical fibre cable has become the preferred choice for connecting RRU and BBU equipment as it provides high bandwidth, low latency and reliable transmission.
View your Network Kit Product was successfully added to your Network Kit.

Showing all Wireless Infrastructure

OPTICAL FIBRE SPLICE AND PATCH PANELS, 1RU, SWING OUT

These 1RU, LH / RH pivot open Splice & Patch, Patch only or Splice only sub-racks (patch panels) accommodate various numbers of optical fibres. They feature optical fibre cord management that maintains the MBR at 30 mm radius throughout. These sub-racks (patch panels) mount in a 19″ / 21″ rack with either front, mid or rear brackets. Can be installed into any ODF or Equipment Rack.

 

patch panels button

Accessories

A full range of accessories including connector cleaning, earthing kits and installation are all available to ensure that WBT products are successfully installed in the telecoms network.

 

Part NumberDescription
TC4039-55Sheath removal tool
TC4039-15KITBracket, multi-feed cable supportTC4039-15KIT Mobiles Catalogue WBT PAGE 16 Mobiles Catalogue WBT PAGE 16 -V2 Mobile networks - Warren and Brown
65900212MTP / MPO connector cleaning tool, one click 65900212 Mobiles Catalogue WBT PAGE 16 Mobiles Catalogue WBT PAGE 16 -V2 Mobile networks - Warren and Brown
66159601Earthing kit, 7/8” hybrid cable66159601 Mobiles Catalogue WBT PAGE 16 Mobiles Catalogue WBT PAGE 16 -V2 Mobile networks - Warren and Brown

OPTICAL FIBRE CABLE STORAGE TRAY

Part number: TC3093M


This optical fibre cable storage tray is used to route and store excess optical fibre patch cord lengths . The open top provides easy access to cable management area and me and the front edge has been lowered and the mounting brackets slotted to assist the installer with the optical cable installation in the commonly very crowded existing equipment racks. Optical cable entry into the tray is via 1 of 4 entry points, 1 on the LHS, 1 on the RHS and 2 on the rear. All cable entries have provision for tying off the cables.

MPO CASSETTES, SINGLE FIBRE, LC DUPLEX

TC7004 Series


The MPO Cassette mounts into a MPO subrack and provides a high density connectivity solution . The rear of the MPO cassette generally contains the MPO adaptors, while the front panel contains either LC, SC or SC/A connector interfaces. For the mobiles solution, generally 16 Fibre MPO – LC Duplex cassette’s are utilised.

OPTICAL FIBRE PATCH PANEL FOR MPO CASSETTES

TC7005 Series


This 1RU subrack accommodates 3 x MPO high density cassettes. The cassettes are available separately and are available with 12, 16 or 24 fibre LC capacity. Generally, for the mobiles solution, LC Duplex 16 fibre MPO cassette’s are utilised, providing a total capacity of 48 fibre LC in 1RU.  The subrack front mounts in a 19” rack, or a 21 inch rack, using extension brackets, which are available separately.

OPTICAL FIBRE PATCH ONLY PANELS, 1RU

Part number: TC2701P24LCDAT


This 1RU sliding drawer module is used to house patching facilities in an optical fibre termination rack. It may be front or rear mounted in a 19” rack. Mounting hardware is supplied and the unit is configured ready to install. The unit has a universal rear entry for the external cable, which allows entry from either side.

SFP OPTICAL TRANSCEIVERS

Optical Fibre Products
See more

SFP OPTICAL TRANSCEIVERS

Part NumberDescription
109X401LC Duplex SFP Module, 10Km, 1470Nm, 1.25Gb/s, CWDM
109X402LC Duplex SFP Module, 10Km, 1490Nm, 1.25Gb/s, CWDM
109X403LC Duplex SFP Module, 10Km, 1510Nm, 1.25Gb/s, CWDM
109X404LC Duplex SFP Module, 10Km, 1530Nm, 1.25Gb/s, CWDM
109X405LC Duplex SFP Module, 10Km, 1550Nm, 1.25Gb/s, CWDM
109X406LC Duplex SFP Module, 10Km, 1570Nm, 1.25Gb/s, CWDM
109X407LC Duplex SFP Module, 40Km, 1470Nm,2.5Gb/s, CWDM
109X408LC Duplex SFP Module, 40Km, 1490Nm,2.5Gb/s, CWDM
109X409LC Duplex SFP Module, 40Km, 1510Nm,2.5Gb/s, CWDM
109X410LC Duplex SFP Module, 40Km, 1530Nm,2.5Gb/s, CWDM
109X411LC Duplex SFP Module, 40Km, 1550Nm,2.5Gb/s, CWDM
109X412LC Duplex SFP Module, 40Km, 1570Nm,2.5Gb/s, CWDM

 

CWDM COUPLER TRAY (P/N TC27102CWDM1)

This CWDM coupler subrack is a 1RU sliding drawer, short depth module and provides patching facilities in an optical fibre equipment or termination rack. The subrack holds a single MUX/DEMUX module, that allows 3 x CWDM systems (of both transmit and receive optical signal streams) to be sent and received on a single fibre.

JUNCTION BOX FOR SINGLE RRU (P/N TC4029CWDM2)

This IP67 rated weatherproof enclosure is typically used at Remote End Radio sites, to provide a connection point for a single fibre and a  48V DC power connection. Up to three of these boxes are used with TC4029CWDM1 (main) coupler box to provide dual wavelength transmission from 3 x RRU sites back to the exchange over a single optical fibre. This product is part of the CWDM mobile front haul solution where there transmission equipment is located in the Exchange (up to 40km away).

  • Suitable for 1 RRU
  • Compatible with 1/2” hybrid cable
  • Remote end site applications
  • Part of mobile front haul solution

COUPLER JUNCTION BOX, FOR 3 RRUS (P/N TC4029CWDM1)

This IP67 rated weatherproof coupler enclosure is generally used at remote end radio sites to provide a connection point for a single fibre, three wavelength transmission up to 3 x RRU sectors back to the Exchange. A single Coupler Box contains a CWDM Mux/Demux module and is used to interconnect with up to 3 x TC4029CWDM2 enclosures.

  • Suitable for 3 RRU’s
  • Interconnects exchange fibre and TC4029CWDM2 enclosure
  • Remote end site applications, CWDM
  • Contains CWDM Mux/Demux module

PLUG AND PLAY ENCLOSURE

System 4 - Plug & Play Hybrid Cable
See more

PLUG AND PLAY ENCLOSURE

Contact Warren and Brown Technologies for further information on the plug and play enclosure. These IP rated enclosures are designed to simplify deployment and provide an effective way of upgrading and installing additional RRU’s.

Looking for a tailored solution? Call us today.