Optical Fibre and Copper Cabling Systems

Wall Boxes & Enclosures

Warren and Brown optical fibre wall boxes & enclosures provide an indoor / outdoor dust resistant and accessible housing for optical fibre services.

Various configurations available.

Showing all Wall Boxes & Enclosures

OPTICAL FIBRE WALL MOUNTED TERMINATION UNIT

TC2994 Series


TC2994 Series wall mounted optical fibre termination units are available with two swing out doors. This is so both the provider and customer sides can be isolated.

OPTICAL FIBRE WALL MOUNTED COMMERCIAL TERMINATION UNIT

TC271 Series


This is a wall mounted 12 fibre optical fibre commercial termination unit with two swing out doors; so that both the provider and customer sides can be isolated. The providers side door is secured by two screws, whilst the customers side door is secured with a catchlock. (A keylock unit is also available, with lock on Providers side).

CUSTOMER WALL BOX, FOR 4 CUSTOMERS, TC4025P

Part Number: TC4025P


This FTTH indoor / outdoor box is made of plastic, that will achieve a long service life. The box is IP65 rated. Provided is a security screw secured, openable cover with a rubber gasket. The box has separate rubber gland cable entries. One gland is for the 4 fibre cable and 4 x 1 fibre glands for customer cables. A single CTM clamp is provided for incoming cable. Up to 4 fusion splices can be housed in the pivot up splice tray. The room is provided for storing several loops of 900μm optical fibre. Through adaptor positions are provided for 4 x SC or A/SC through adaptors. Guiding/storage clips are located internally to guarantee the MBR of the stored optical fibre. 2 x holes are provided for mounting screws. An accessory kit is provided.

OPTICAL FIBRE FTTH MDU WALL BOX, 1 FIBRES

Part number: TC4025WB1SAA


Warren and Brown Technologies have developed a Fibre Wall Outlet for the National Broadband Network which is intended to be installed in every household around Australia.

The customer premise Fibre Wall Outlet (FWO) houses a single A/SC connector, for a single fibre service. A spring loaded shield covers the connectors end position, which provides dust protection when it is not in use. The unit has a full height, clip on cover and mounts on a standard GPO style bracket for easy installation. The outlet is supplied in four different colours ivory, white, light grey, beige and cream.

Generally in a FTTH network the FWO is the interconnection point between the external cable from the Premise Connection Device (PCD) and the Optical Network Terminal (ONT). The Warren & Brown FWO has the facility to store excess fibre, fusion splices or direct patch cord connections.

The multitude of options available make the FWO a practical device for use in other fibre optical networks where a single optical fibre port is required such as offices, data centres and other enterprise networks.

OPTICAL FIBRE FTTH MDU WALL BOX, 4 FIBRES

Part number: TC4025WB4SCP


4 Fibre Splice & Patch FTTH Indoor Wall box

OPTICAL FIBRE FTTH MDU WALL BOX, 8 FIBRES

Part number: TC4027M8


8 Fibre splce / patch wallbox ideally suited for indoor use in servicing up to 8 individual premises within a Multi Dwelling apartment block.

This medium sized, plastic box, is used as a final outdoors distribution point for 8 Customers, served by 8 x individual drop cables. Also allowed for is a cable feed on option to other nearby boxes. It has a pivot open cover. An inner pivot open tray houses 8 x A/SC through adaptors; that are available separately. Below this is a splice tray compartment that also houses a 1 x 8 way splitter; available separately.Two 12mm dia feeding and distribution optical fibre cables can enter the box through weather resistant seals. The box allows access for: fibre testing or fault finding. As the box is a neutral grey color it can be used in the majority of sites. The box is made of plastic to ensure a long service life outdoors. It has a security fastener to hold the cover securely

OPTICAL FIBRE FTTH MDU WALL BOX, 16 FIBRES

Part number: TC4027L16


This large sized, plastic box, is used as a final outdoors distribution point for 16 Customers, served by 16 x individual drop cables. Also allowed for is a cable feed onoption to other nearby boxes. It has a pivot open cover. An inner pivot open tray houses 16 x A/SC through adaptors; that are available separately. Below this is a splice traycompartment that also houses a 1 x 16 way or 2 x 8 way splitters; available separately. Two 12mm dia feeding and distribution optical fibre cables can enter the box through weather resistant seals. The box allows access for: fibre testing or fault finding. As the box is a neutral grey color it can be used in the majority of sites. The box is made of plastic to ensure a long service life outdoors. It has a security fastener to hold the cover securely

OPTICAL FIBRE FTTH MDU WALL BOX, 24 FIBRES

Part number: TC4027L24SA2


Applicable for the FTTX projects which provide mechanical protection for fibre management system that includes the functions of splicing, patching and passive component integration.

The boxes are typically mounted on walls inside/outside the customer’s premises in the termination part of the access network.

Looking for a tailored solution? Call us today.