Showing all Optical Fibre Cable Management
The 1RU, Guide Unit, for running optical fibre cords in a rack, is typically used to guide and locate optical fibre cords going to rack mounted equipment. The thin and strong design can safely and neatly hold many optical fibre cords in the five, openable style, guiding/securing clips provided. The Guide Unit ensures maximum space is available in the rack for the cooling air stream. The Guide Unit fits a 19″ rack. However, extension units are available separately, so the unit can be mounted in 21″ and 23″ racks. If required, hook and loop style ties available separately.
These cable management and storage units provide the ideal solution for securely and safely housing any excess optic fibre cables and also adhere to MBR standard. Also suitable for copper cabling systems.
This is a modular storage system for optical fibre cords, where no other storage system exists, or the existing overhead duct storage system is full. Used to route and store excess optical fibre cord length in a 300mm deep rack, before cords connect to transmission equipment. Maintains MBR for optical fibre cords at 30mm radius.
Purchase as a “Start” kit TC3092-101KIT (Upper & Lower Modules) and add Central “Expansion” Module/s (TC3092-102KIT) as required.
The 3 RU high Storage System for Optical Fibre has four storage spools of 60mm diameter x 75mm, 140mm, 180mm or 210mm long, plus a base member to support and guide optical fibre cords as they enter and leave the module. Each storage spool has a “finger style” end. The storage spools guarantee the MBR for stored optical fibre cord, at 30mm radius. The “finger style” ends provide access room for optical fibre cord storage and removal; and securely hold optical fibre cord in the storage unit. The Storage System can be mounted in a 19″ Rack and used for storage of excess length’s of optical fibre cord’s.
Part Number: TC3093
This Storage Unit, needs 2RU of rack space, to allow excess length of optical fibre cord’s to be formed into 120mm diameter coils, and neatly stored on the tray, in the openable style clips provided. Featured are side entry curved guides for feeding optical fibre cords to lower levels in the rack. The Storage Unit is rear mounted in a 19″ Rack, using the 4 x M6 mounting screws & cage nuts supplied. This Storage Unit may be used in racks, where available space is a premium.
Part Number: TC247007WM
This 1 RU, Storage Tray allows excess length of optical fibre cord/s to be formed into typically 120mm diameter coils or loops, using the openable style guiding clips provided, and neatly stored on the tray. Theslide open Storage Tray is front/mid (140mm) / or rear mounted in a 19″ or 21″ Rack, using the 4 x M6mounting screws and cage nuts supplied. The tray opens approximately 150 mm. The Storage Tray is ventedto allow a cooling air stream to flow in a Rack. This Storage Tray may be used in racks, where available spaceis a premium. It is recommended individual coils of optical fibre cord be secured by several hook and loopstyle ties. Always provide adequate slack cord length in the side of the rack, to allow the tray to openand close, without stressing any optical fibre cord.
This compact 1 RU high, storage tray is designed to efficiently guide and store small size cables, such as optical fibre cords, leaving the rear of Rack mounted transmission equipment. The cords/cables are guided to the LHS cable outlet of the Rack, where, if required, they can be dropped off to a lower level. The tray is equipped with a series of 22 cable guiding/storage guides, that store and guide the leaving cords/cables. The layout of the guides maintains the cords/cables MBR of 30 mm. Provision for reversing the direction of an optical fibre cord on the tray is available.