Showing all Optical Fibre Accessories
Part Number: 129x01KIT
This small plastic break-out module, enables a 6.0mm – 9.0mm diameter ribbon fibre cable containing up to 6 x 12 fibre ribbons, to be individually separated and have each ribbon installed into a 6mm x 3mm rectangular plastic transport tube.
The Transponder Peg detector Instrument is a portable, hand held instrument, used for locating vertically buried transponder pegs in the ground. It can typically find pegs buried vertically up to a depth of 1.5 metres. The instrument operates off 12 AA size batteries, for a typical 20 hours field life. It has an adjustable time out feature that prolongs battery life [and can be turned off]. A battery level indicator and low battery warning is provided. When nearby a buried peg, during relocation activities, a large bar graph and numeric and audible strength indicators, indicate the peg location. A user adjustable detection threshold is provided. The instrument features digital signal processor accuracy. A speaker volume adjustment is provided also. The instrument is weather resistant, of rugged construction, and operates over a temperature range from – 20 degrees Celsius to + 50 degrees Celsius. Accessories available include headphones and a carry case – Part Number: 49400052-B.
Part Number: 65900200
This kit contains a complete set of items that enable optical fibre connectors and through connectors/adapters to be quickly cleaned in a safe and effective manner. Replacement items are available separately.
The cleaning solvent is Iso-Propyl Alcohol (IPA) One small container (eg 1 x 50 ml bottles) are included in the Cleaning Kit.
Part number: 62×006
This tool is used to extract either SC or A/SC through adaptors from densely populated patch panels. It is made from stainless steel to ensure a long service life. The tool has two small magnets attached to its back, which enable it to be stored in any convenient place on a steel rack or subrack. The tool is also designed to unplug WBT style through adaptor dust caps, with a central hole, from densely populated patch panels.
This compact, hand size, ergonomic type, connector cleaner, is quick, simple and effective way of cleaning the end face of common optic fibre connectors and through adaptors. These include: SC, FC, ST, D4, LC, DIN and Biconic connectors. Cleaning is achieved by removing the dust covers from the tool and connectors, inserting the tool into the through adaptor, or connector ferrule onto end cap of the tool and pushing the tools handle to start cleaning the connector end face. When a “click” sound is heard, cleaning is finished. Remove tool and replace end cap dust covers. If necessary repeat the operation a second time, to achieve a better result. A cleaning unit is good for approximately 400/500 cleaning operations. This cleaning unit is suitable for use in Exchanges/CO’s or commercial premises.
Part number: 63999202
This is a compact, portable connector inspection and cleaning instrument for field or Exchange use. There is a fixed connector viewing attachment on the main instrument, which accepts different viewing aids for different connector types. Supplied is a handset probe, which enables viewing of female connector types, using different viewing end attachments. Included is a replaceable in-built connector cleaner cassette, that allows three wipes on each of 50 cleaning sheets, ie 150 cleans from each cassette. Also available is a pen style item that enables ends of connectors to be wiped with approved connector cleaning fluid. The pen clips to the side of the instruments body. This instrument has an in-built LCD screen for safe viewing of connector ends. It is either battery powered or mains powered using a DC adaptor unit. A battery charge lasts about 4 hours. When not in use an automatic power saver mode operates to conserve battery life. The connector image can be loaded onto a PC using the USB port, using cable provided. Also the probe can be directly connected to a PC, and using supplied software, the image can be displayed and edited on the screen. Enables connector ends to be quickly checked and cleaned if/as required; using either wet or dry cleaning method. A complete range of connector viewing tips are available, for the instrument and hand probe. Consumable items eg cleaning cassette and pen are available separately.