Optical Fibre and Copper Cabling Systems

Ducting Raceway

WBT's fibre optic ducting raceway brand Yellowduct, is a unique system for routing and protecting fiber optic cords between termination equipment, patch panels and fibre optic splicing cabinets or frames in telecommunications exchanges, data centres, universities, hospitals, or anywhere fibre optic cabling is present. Easily mounted above equipment racks or below floors, it provides an easily accessible solution to any situation.

Showing all Ducting Raceway

CABLE SEPARATOR KIT

pdf icon TC1279-570KIT

The Duct Cable Separator Kit is installed longitudinally along the length of a duct run, to provide a separator or divider in the duct. The item is used to create separate compartments for different cords or cables. A 500mm length of double sided tape is supplied and is used to fasten the cable separator kit in position, longitudinally down the duct run.

DUCTING MISCELLANEOUS PRODUCTS

pdf iconTC1279-156UNIVERSAL RADIUS GUIDE  –  P/N TC1279-156

This guide is a simple means of providing a 30-mm radius guide that eliminates fiber stress through bending

 pdf icon PIGTAIL RADIUS GUIDE KIT  –  P/N TC1279-72KIT

The pigtail radius guide provides a 90 degree bend, but the guides are interlocking so that many can be joined to form U turns, circles & spirals – as required. (10 per kit)

 pdf icon RAMP OFF FOR 300, 200, 100mm DUCT   –   P/N TC1279-294

Provides a safe bending radius for the fibers being dropped off or leaving: 300mm, 220mm or 100mm duct. It does this simply by providing a curved ramp up which fiber is able to form a 30mm radius

 pdf icon GREY PVC SLOTTED DUCT  –  P/N TC1279-55KIT 50 X 50mm X 2m

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

pdf iconGREY PVC SLOTTED DUCT  –  P/N TC1279-58KIT 25 X 30mm X 2m

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

pdf iconGREY PVC SLOTTED DUCT  –  P/N TC1279-99KIT 60 X 40mm X 2m (not slotted)

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

 

 

pdf icon

 DUCT CABLE SEPARATOR KIT  –  P/N TC1279-570KIT

The Duct Cable Separator Kit is installed longitudinally along the length of a duct run, to provide a separator or divider in the duct. The item is used to create separate compartments for different cords or cables.

MOUNTING BRACKET KIT

Part Number: TC1279-78KIT


This is simply a bracket, with a threaded stud and two screws, that can be fixed to the duct and any existing building. For 30mm duct the plate is mounted along the duct length, and for 50mm duct the plate is mounted across the duct. This allows simple adjustment, while providing adequate strength for the loads associated with the smaller ducting systems.

MOUNTING BRACKET KIT, 90 DEGREES

Part number: TC1279-130KIT


This kit is a simple and adjustable means of attaching/mounting either 50 or 30mm duct, in either a vertical or horizontal plane. It is generally used to mount 50-mm duct at the front of a rack. The kit consists of: a pair of adjustable, 90 degree mounting brackets; a small mounting plate, with a stud, nut & washer; and adhesive backed hook & loop mounting/fastening pad.

SIDE MOUNTING BRACKET, HEAVY DUTY

Part Number: TC1279 – 303A


This Side Mounting Bracket is used to install & secure 300mm duct (Part No: TC1279-275A) in a straight run. This Bracket is typically spaced at 0.9 metres or less, to make a rigid & strong installation. The duct is mounted in the Duct Mounting Bracket (Part No: TC1279-297A); which in turn is bolted to the Side Mounting Bracket, using the M12 (1/2”) x 20mm long hex bolt & washer included. The Side Mounting Bracket is secured, at the desired height, to 5/8” UNC threaded rod, using 2 x 5/8 “ UNC hex. nuts & washers. Both the 5/8” UNC threaded rod x 300mm, 760mm or 1000mm long (Part No’s: 93×5-8×300; 93×5-8×760 or 93×5- 8×1000); and 5/8” UNC hex nuts & washers (Part No: TC1279-120KIT); are available separately.

DUCTING MOUNTING BRACKET AND BOLT ASSEMBLY

This assembly consists of a standard 30 mm (50mm, 100mm, 220mm, 300mm) duct support bracket, with a captive M12 nut and bolt set; that enables the duct support bracket to be bolted to any other mounting bracket. This assembly is used where the duct is directly mounted to flat brackets with 13mm (1/2 inch clearance) dia holes.

DUAL LEVEL MOUNTING BRACKET, FOR 100, 220mm DUCT

Part Number: TC1279-152KIT


The dual level mounting bracket is used to mount 3 ducting systems at 2 different heights, on a common bracket; usually to allow cross over between the 3 ducting systems. Typically, optical fibre systems are at one level, with data and electrical systems at the others, so that crossover is achieved between the separate ducted services with minimum difficulty. It fits to standard Unistrut (TM) steel work, and is provided with a bolt, clamping nut & spring for that system.

LADDER RACK MOUNTING KIT, FOR 30, 50mm DUCT

Part Number: TC1279-154KIT


This clamp is a means of fixing either 30 or 50mm duct systems to 1.5″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. It is used in conjunction with 30  and 50mm duct mounting brackets (Part No’s. TC1279-148A & TC1279-147A).

LADDER RACK MOUNTING KIT, FOR 100, 220mm DUCT

Part Number: TC1279-155KIT


This clamp is a means of attaching either 100 or 220mm duct systems to 1.5″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. Use in conjunction with 220 and 100mm duct mounting brackets (Part No’s: TC1279-13 & TC1279-14).

MOUNTING BARACKET ADAPTOR

Part Number: TC1279 – 171


This bracket fits over 2″  (50mm) square Unistrut ™ section to provide a strong fixing position for: 300, 220 and 100mm duct mounting brackets (Part No: TC1279-297AKIT, TC1279-13A & TC1279-14A). It is used with ½ inch dia threaded rod.

LARGE LADDER RACK MOUNTING KIT, FOR 100, 220, 300mm DUCT

Part Number: TC1279–370KIT


This clamp is a means of attaching either 100, 220 or 300mm duct systems to 1″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. Use in conjunction with 300, 220 and 100mm duct mounting brackets (Part No’s: TC1279-297, TC1279-13 & TC1279- 14), available separately.

SUPPORT BRACKET, FOR 200 x 100mm DUCT

Part Number: TC1279-572KIT


This supporting bracket set,enables a 220mm x 100mm duct system to be installed in the aisle, below the overhead super structure, in front of the racks to be serviced.

VERTICAL STRUT MOUNTING KIT, FOR UNDER FLOOR SYSTEMS

Part number: TC1279–197KIT


This clamp is a means of attaching either a 220 or 100mm duct system to (up to) 30mm (1”) diameter tube or 25mm (1”) square tubes in an under floor system. It consists of a slotted bracket and U bolt which fit the standard round or square vertical used in most sub floor systems. It is attached to the tube by the bracket and U-bolt, which clamp the tube between the bracket and U-bolt. Two 8mm dia oversize washers are included to aid clamping to square vertical RHS tube, as well as round tube. A single long slot provides a range of horizontal adjustment. The duct-mounting bracket, (220mm duct Part No: TC1279-13; 100m duct, Part No: TC1279-14) is mounted at the slot to hold the duct in place. These brackets are available separately.

UNDER FLOOR MOUNTING BRACKET

Part number: TC1279 – 274


The Under Floor Mounting Bracket enables ducting components to be quickly and simply glued to a clean, dust free, concrete floor. The bracket eliminates the need to have to drill into a concrete floor to install fasteners. An M12 threaded nut is welded on the underneath edge at the top of the bracket.  The M12 nut accepts M12 threaded rods, that support under floor ducting.

MOUNTING BRACKET ASSEMBLY, FOR 220mm DUCT

Part number: TC1279-13A


The mounting bracket provides an adjustable mounting mechanism for the 220 mm plastic ducting system. It is basically an M12 threaded metal rod and support bracket that connects straight duct (Part No: TC1279-21A, Telstra No: 035300392) to existing building steel – work. A plastic protection tube is included to prevent optical fibres catching in the rod thread.

MOUNTING BRACKET ASSEMBLY, FOR 100mm DUCT

Part number: TC1279-14A


The mounting bracket provides an adjustable mounting mechanism for the 220 mm plastic ducting system. It is basically an M12 threaded metal rod and support bracket that connects straight duct (Part No: TC1279-23A, Telstra No: 035300393) to existing building steel – work. A plastic protection tube is included to prevent optical fibres catching in the rod thread.

MOUNTING PLATE KIT, FOR 30mm, 50mm DUCT

Part number: TC1279-129KIT


The mounting plate comes with 2 part adhesive backed, hook & loop fastener, pad set, for quick and easy attaching to 30mm & 50mm duct. A 1/2” UNC tapped hole is provided on the plate to enable assembly to ½ inch (12mm) dia x 400mm long standard threaded rod (Part No: 93x12x400); which is included in the kit. Three ½ inch hex nuts & washers are provided for securing the installation; and for attaching the kit to existing steel work. A plastic tube is included to protect the threaded rod.

SUSPENSION KIT, FOR 220mm DUCT

Part Number: TC1279-106KITA


The suspension mounting bracket kit is used to attach either 220mm (or 100mm) plastic duct to existing steelwork, from above. It consists of: 2 x M12 threaded rods (Part No: 93 x 12 x 400 – M12 x 400mm long) with a straight bracket (Part No: TC1279-106) and fasteners, which enables fitting of a duct mounting bracket (Part No: TC1279-13) to the straight bracket. Plastic protection tubes are supplied to prevent entanglement of optical fibre cords during installation; and to protect the threaded rod from damage.

SUSPENSION KIT, FOR 100mm DUCT

Part number: TC1279-107KITA


The suspension mounting bracket kit is used to attach 100mm plastic duct to existing steelwork, from above. It is a straight bracket (Part No: TC1279-107) with 2 x M12 threaded rods and fasteners (Part No: 93 x 12 x 400 – M12 x 400mm long) to enable fitting of a duct mounting bracket (Part No: TC1279-14) from the building ceiling or overhead steelwork. Plastic protection tubes are supplied to prevent entanglement of optical fibre cords during installation; and to protect the threaded rod from damage.

Looking for a tailored solution? Call us today.