Optical Fibre and Copper Cabling Systems

Ladder Rack and Unistrut Mounting

WBT’s fibre optic ducting raceway brand Yellowduct, is a unique system for routing and protecting fiber optic cords between termination equipment, patch panels and fibre optic splicing cabinets or frames in telecommunications exchanges, data centres, universities, hospitals, or anywhere fibre optic cabling is present. Easily mounted above equipment racks or below floors, it provides an easily accessible solution to any situation.

Showing all Ladder Rack and Unistrut Mounting

DUAL LEVEL MOUNTING BRACKET, FOR 100, 220mm DUCT

Part Number: TC1279-152KIT


The dual level mounting bracket is used to mount 3 ducting systems at 2 different heights, on a common bracket; usually to allow cross over between the 3 ducting systems. Typically, optical fibre systems are at one level, with data and electrical systems at the others, so that crossover is achieved between the separate ducted services with minimum difficulty. It fits to standard Unistrut (TM) steel work, and is provided with a bolt, clamping nut & spring for that system.

LADDER RACK MOUNTING KIT, FOR 30, 50mm DUCT

Part Number: TC1279-154KIT


This clamp is a means of fixing either 30 or 50mm duct systems to 1.5″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. It is used in conjunction with 30  and 50mm duct mounting brackets (Part No’s. TC1279-148A & TC1279-147A).

LADDER RACK MOUNTING KIT, FOR 100, 220mm DUCT

Part Number: TC1279-155KIT


This clamp is a means of attaching either 100 or 220mm duct systems to 1.5″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. Use in conjunction with 220 and 100mm duct mounting brackets (Part No’s: TC1279-13 & TC1279-14).

MOUNTING BARACKET ADAPTOR

Part Number: TC1279 – 171


This bracket fits over 2″  (50mm) square Unistrut ™ section to provide a strong fixing position for: 300, 220 and 100mm duct mounting brackets (Part No: TC1279-297AKIT, TC1279-13A & TC1279-14A). It is used with ½ inch dia threaded rod.

LARGE LADDER RACK MOUNTING KIT, FOR 100, 220, 300mm DUCT

Part Number: TC1279–370KIT


This clamp is a means of attaching either 100, 220 or 300mm duct systems to 1″ and 2″ ladder racks. It is attached to the rack by a plate and two screws, which clamp the rack between the plate and clamp body. Multiple holes provide vertical adjustment in 21mm increments. Use in conjunction with 300, 220 and 100mm duct mounting brackets (Part No’s: TC1279-297, TC1279-13 & TC1279- 14), available separately.

SUPPORT BRACKET, FOR 200 x 100mm DUCT

Part Number: TC1279-572KIT


This supporting bracket set,enables a 220mm x 100mm duct system to be installed in the aisle, below the overhead super structure, in front of the racks to be serviced.

Looking for a tailored solution? Call us today.