Optical Fibre and Copper Cabling Systems

Ducting Products

WBT’s fibre optic ducting raceway brand Yellowduct, is a unique system for routing and protecting fiber optic cords between termination equipment, patch panels and fibre optic splicing cabinets or frames in telecommunications exchanges, data centres, universities, hospitals, or anywhere fibre optic cabling is present. Easily mounted above equipment racks or below floors, it provides an easily accessible solution to any situation.

Showing all Ducting Products

STRAIGHT DUCT LENGTHS

WBTs YellowDuct straight ducting~raceway is available in six sizes with or without covers. Slotted duct/raceway is available in some sizes for vertical drops or applications inside equipment racks to allow cords to exit through the side of the duct. Some sizes are available with hinged covers (hinges included in pack), or clip on covers. All duct sizes come in 2m (6.3′) lengths, and where required, are slotted at each end for simply snapping together with an appropriate joiner. Most other ducting – raceway brands are only available in 6 foot lengths – 10% shorter than Lightpaths.

JOINERS

Ducting Products
See more

JOINERS

WBT YellowDuct joiners are used to snap together system components and straight ducting~raceway. They simply snap into the slots in the end of each piece to be joined.

The YellowDuct ducting raceway system has 2 option methods for joining the components together, slotted joiners or slotless joiners:

  • Slotted Joiners require the ducting components to have slots on the ends so that it can be properly joined by clicking into place. A slotting tool will be required.
  • Slotless joiners require no additional tooling or for slots to be made in the side of the
    duct. They only require a screwdriver for installation to tighten the joiner into place

Note: For straight ducting~raceway that has been cut to length, new slots need to be made with a suitable size slotting tool.

VERTICAL ELBOWS

Ducting Products
See more

VERTICAL ELBOWS

WBT YellowDuct vertical elbows are used to connect horizontal routes at different height, or to allow the fiber path to be raised or lowered to avoid obstacles. Retrofit versions are used where there is existing fiber. They are available with or without covers.

Vertical Elbows - ducting - Warren and Brown

HORIZONTAL ELBOWS

Ducting Products
See more

HORIZONTAL ELBOWS

Lightpaths Horizontal Elbows are used to change the direction of horizontal routes. They are available with or without covers.

VERTICAL TEES

Ducting Products
See more

VERTICAL TEES

Lightpaths Vertical Tees can be used to drop cables vertically from horizontal routes into frames or cabinets. Retro fit tees provide open access and are used where cables are already in place. They are available with or without covers.

HORIZONTAL TEES

Ducting Products
See more

HORIZONTAL TEES

Lightpaths Horizontal Tees may be used to branch off the main route or provide a method of breaking into Horizontal Duct. They are available with or without covers.

CROSSES

Ducting Products
See more

CROSSES

WBT YellowDuct horizontal crosses can be used to provide a cross section intersection in straight duct.

Reduction crosses join horizontal duct of different sizes.

ADAPTORS

Ducting Products
See more

ADAPTORS

Most other Ducting brands can be slotted with a lightpaths slotting tool to suit one of our slotted joiners. WBT Adaptors are used to connect parts from other brands to the Lightpaths ducting~raceway.

REDUCERS

Ducting Products
See more

REDUCERS

WBT Reducers allow different size ducts to be joined together.

They are available with or without covers.

STORAGE LOOPS

Ducting Products
See more

STORAGE LOOPS

YellowDuct Fiber Storage Loops are used to safely store excess fiber length and can be placed in any horizontal route or inside cabinets. They are available in inline or offset versions.

END CAPS

Ducting Products
See more

END CAPS

YellowDuct End Caps are used to close off the end of a horizontal or vertical route of duct. Some are sealed, others have knock outs or spigots for convoluted tubing or fiber feedout.

TUBING

Ducting Products
See more

TUBING

WBT YellowDuct Tubing is used for feeding entering or exiting fibers from the ducting~raceway into equipment racks. They are convoluted or ribbed to allow adjustment if drops cannot be positioned exactly over or under equipment. Some are available with removable covers, or split for ease of cable installation.

DROP-OFF SOLUTIONS

Ducting Products
See more

DROP-OFF SOLUTIONS

These components provide different methods of allowing fibres to enter or leave the duct – raceway. They can be purchased as kits or as individual items.

DROP COMPONENTS

Ducting Products
See more

DROP COMPONENTS

These components provide different methods of allowing fibers to enter or leave the duct – raceway. They can be purchased as kits or as individual items.

HIGH CAPACITY OUTLETS

These new Duct breakout kits provide the ideal solution for a high capacity fibre cord outlet. This solution provides a safe and effective means of protecting optic fiber cords and allows for easy routing of cords down into a Telecommunications frame. Duct outlets can be placed anywhere along the duct and minimal time and effort is required to install these outlet components. This solution allows for quickest installation as less cuts are required and is also stronger as the ribs of duct are not cut.

CABLE SEPARATOR KIT

pdf icon TC1279-570KIT

The Duct Cable Separator Kit is installed longitudinally along the length of a duct run, to provide a separator or divider in the duct. The item is used to create separate compartments for different cords or cables. A 500mm length of double sided tape is supplied and is used to fasten the cable separator kit in position, longitudinally down the duct run.

DUCTING MISCELLANEOUS PRODUCTS

pdf icon TC1279-156 UNIVERSAL RADIUS GUIDE  –  P/N TC1279-156

This guide is a simple means of providing a 30-mm radius guide that eliminates fiber stress through bending

 pdf icon   PIGTAIL RADIUS GUIDE KIT  –  P/N TC1279-72KIT

The pigtail radius guide provides a 90 degree bend, but the guides are interlocking so that many can be joined to form U turns, circles & spirals – as required. (10 per kit)

 pdf icon   RAMP OFF FOR 300, 200, 100mm DUCT   –   P/N TC1279-294

Provides a safe bending radius for the fibers being dropped off or leaving: 300mm, 220mm or 100mm duct. It does this simply by providing a curved ramp up which fiber is able to form a 30mm radius

 pdf icon   GREY PVC SLOTTED DUCT  –  P/N TC1279-55KIT 50 X 50mm X 2m

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

pdf icon GREY PVC SLOTTED DUCT  –  P/N TC1279-58KIT 25 X 30mm X 2m

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

pdf icon GREY PVC SLOTTED DUCT  –  P/N TC1279-99KIT 60 X 40mm X 2m (not slotted)

This slotted duct is used for dropping off optical fibers from the overhead ducting system to racks & equipment sub-racks/panels.

 

 

pdf icon

  DUCT CABLE SEPARATOR KIT  –  P/N TC1279-570KIT

The Duct Cable Separator Kit is installed longitudinally along the length of a duct run, to provide a separator or divider in the duct. The item is used to create separate compartments for different cords or cables.

Looking for a tailored solution? Call us today.